ROD鼓形齒式聯軸器是Rokee獨立開發的核心技術傳動產品之一并且在國家建立和報備了企業技術標準,結合了日本,德國等先進國家的鼓型齒聯軸器標準技術,優化了很多細部尺寸鏈,采用了大壓力角齒形設計,軸孔采用短軸設計,縮小了長徑比,結構更加緊湊,轉速性能優異。相近型號的螺栓采用標準統一化,零部件通用性好。
與國家標準齒式聯軸器相比能夠傳遞更大的扭矩,質量相對大幅度減輕,轉動慣量小,符合歐洲防爆要求,各種綜合性能大大超前。為了更好的傳動性能,我們強烈推薦您選用。
鼓型齒式聯軸器是一種特別設計的先進齒式聯軸器,其外齒制成球面,球面的中心在齒輪的軸線上,齒側的間隙比一般產品稍大,鼓形齒聯軸器可以傳遞較大的扭矩和允許較大的角位移,性能優異且壽命更加長久。
As the gear type flexible coupling, it can be applied into various general drive sites. Due to the special hook face drum gear design, in the definitive deviation scope, it can effectively avoid the edge stress concentration at tooth meshing, so it has outstanding radial and angular centering capacity. Moreover, it can ensure long service life. ROD series drum gear coupling is one of Rokee’s core technical products. It has compact and reasonable structure, light weight, small hole-position fitting draw ratio, large pressure angle design, accurate centering and excellent speed performance. The bolt design has been standardized in series, the universality of parts is good and its service life far exceeds the one of domestic products.
The gear sleeve at both sides is in the structure of locating ring and uniform parts are used. In addition, the sealing is excellent and easy. Curved-tooth Gear Couplings are applied with larger pressure angle design. The product design is more reasonable and quality is reliable. The gear backlash is reasonable. All ROD series drum type gear couplings are designed in optimization, the structure is more compact and the proportion of hole diameter and length is more coordinated and reliable. Light weight and small rotational inertia. It’s made of high-quality alloy forged steel. It’s very applicable to the sites with anti-explosion requirements. The bolt size of adjacent models is the same and the installation is more convenient. Gear Coupling parts of same model can be exchanged for installation.
尼龍齒式聯軸器是部分標準化生產的產品,在選擇尼龍齒式聯軸器的開始階段,尼龍齒式聯軸器無法找到適配類型,則可以進行定制生產。尼龍齒式聯軸器型號調整還要考慮尼龍齒式聯軸器連接的主動軸和從動軸之間的轉速是否一樣,軸徑是否相同。尼龍齒式聯軸器的聯接形式是由主動軸和從動軸的連接形式來確定的,相對把比較采用的連接方式是鍵聯接。
尼龍內齒式聯軸器的品種和類型的選擇是基于尼龍齒式聯軸器在傳動系統中發揮的綜合功能來確定的,傳動系統總體設計的因素,如原動機的類型、工作載荷的種類、原動機的轉速、傳動精度、軸偏移量、工作環境的狀態,齒式聯軸器在工作時,齒式聯軸器需在有良好和密封的狀態下工作,尼龍齒式聯軸器初選過后應根據主動軸和從動軸的軸徑、軸孔長度來確定尼龍齒式聯軸器的尺寸。
聯軸器,膜片聯軸器,齒式聯軸器,萬向聯軸器,萬向軸,膜片式聯軸器,彈性聯軸器,聯軸器廠家,聯軸器生產廠家
《內齒圈鼓形齒聯軸器制造廠家》發布于2024年3月25日,本文地址:http://www.willtec.com.cn/lzqbk/21097.html